Semua produk
Food grade PP Packaging for Effervescent Tablets pills with color and logo customized
| Tempat asal | Cina |
|---|---|
| Nama merek | JND |
| Sertifikasi | FSSC 22000;ISO 9001; |
| Nomor model | VCB29F48 |
| Kuantitas min Order | 50000 buah |
| Harga | $0.067/pieces 10000-19999 pieces |
| Kemasan rincian | PE Bag +Kertas Kertas Ukuran: 580*380*330mm untuk tabung 1100pcs; 380*290*460mm untuk tutup 1500 pcs |
| Waktu pengiriman | 3-5 hari |
| Menyediakan kemampuan | 38000pcs per hari untuk tabung; 47000 pcs per hari untuk topi |
Hubungi saya untuk sampel gratis dan kupon.
Whatsapp:0086 18588475571
Wechat wechat: 0086 18588475571
Skype: sales10@aixton.com
Jika Anda memiliki masalah, kami menyediakan 24 jam bantuan online.
xDetail produk
| Penggunaan Industri | teststrips medis; tablet vitamin, mineral, suplemen, permen | Bentuk Tabung | Silinder |
|---|---|---|---|
| Bahan tubuh | Pp | Bahan topi | PE |
| Jenis plastik | Pp | Topi | Flip atas |
| OEM | Menerima | Pencetakan | Pencetakan transfer panas atau IML |
| Volume | 24.5 ± 1ml | Aplikasi | teststrips medis; tablet vitamin, mineral, suplemen, permen |
| Pengering | Ya | Nama Produk | Tablet Efervescent Kemasan Tabung |
| Kata kunci | tabung plastik tablet produk baru | Fitur | sehat |
Deskripsi Produk
Product Specification:
- As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
- Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
| Type | No. | Item | Specifications | Inspection method | AQL Type | |
Molding
| 1
| Appearance |
| Visual | Light | |
| 2 | Peculiar smell | No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample | Smell | Main | ||
| Size | 1 | ￠29*48 | Diameter | 29.0±1.0mm | caliper | Main |
| Height | 48.0±1.0mm | Height gauge | Main | |||
| Wall Thickness | 1.0±0.4mm | caliper | Main | |||
| 2 | ￠29 Flip-top cap | Diameter | 29.0±0.8mm | caliper | Main | |
| Height | 15.0±1.0mm | Height gauge | Main | |||
| Function | 1 | Sealing Property | Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. | Visual | Main | |
| 2 | Drop Property | Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. | Visual | Main | ||
| 3 | Thermo stability | Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured | Visual | Main | ||
| 1 | Drawing | Color, Picture and Words same as standard sample | According to standard sample | Key | ||
| 2 | Appearance | The appearance of the printed product is clean no soiling and deformity refer to standard sample | Visual | Light | ||
| 3 | Peel strength | Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. | Tape test | Main | ||
Storage:
♦keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
♦Need to pad higher, away from the ground and wall 10cm above. no pressure
Rekomendasi Produk
