Semua produk
Kontak Person : Zhang
Nomor telepon : 13901990867
Whatsapp : +8613901990867

Plastic PP Tube with Spiral lid for the packaging of effervescent tablets supplements

  • Plastic PP Tube with Spiral lid for the packaging of effervescent tablets supplements
  • Plastic PP Tube with Spiral lid for the packaging of effervescent tablets supplements
Tempat asal Anhui, Cina
Nama merek JND
Sertifikasi FSSC 22000;ISO 9001;
Nomor model VCB29T84
Kuantitas min Order 50000 buah
Harga $0.085/pieces 10000-19999 pieces
Kemasan rincian PE Bag +Kertas Kertas Ukuran: 580*380*330mm untuk tabung 600 pcs; 380*290*460mm untuk tutup 1500 pcs
Waktu pengiriman 3-5 hari
Menyediakan kemampuan 35000 pcs untuk tabung per hari; 24000 pcs untuk topi per hari

Hubungi saya untuk sampel gratis dan kupon.

Whatsapp:0086 18588475571

Wechat wechat: 0086 18588475571

Skype: sales10@aixton.com

Jika Anda memiliki masalah, kami menyediakan 24 jam bantuan online.

x
Detail produk
Penggunaan Industri Perawatan pribadi Menggunakan perawatan pribadi lainnya
Bahan tubuh Plastik, PP kelas makanan Cetakan Cetakan injeksi
Bahan tutup PE Warna Disesuaikan
Topi topi spiral dengan pengeringan Pencetakan Pencetakan transfer panas atau IML
Aplikasi tablet vitamin, mineral, suplemen Logo CusterMized
Penggunaan tablet vitamin, mineral, suplemen Nama Produk Tabung tablet vitamin C effervescent dengan penutup pengeringan
Tinggalkan pesan
Deskripsi Produk

 Production Specification:

 

  • As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012

 

  • Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II

 

 

 

Type No. Item Specifications Inspection method AQL Type

Molding

 

1

 

 Appearance
  • Smooth surface, no obvious impurities, color particles and black spots
  • Under normal distance 30cm, normal light, no black spots, impurities
  • Uniform color, no mottled
 Visual Light
  2 Peculiar smell No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample Smell Main
  3 ￠29*84 Diameter 29.0±1.0mm caliper Main
      Height 84.0±1.0mm Height gauge Main
      Wall Thickness 1.0±0.4mm Caliper Main
      Height 15.0±1.0mm Height gauge Main
  4 ￠29 Spiral Cap Diameter 28.0±0.8mm caliper Main
      Height 33.0±1.0mm Height gauge Main
Function 1 Sealing Property Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. Visual Main
  2 Drop Property Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. Visual Main
  3 Thermo stability Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured Visual Main
Print 1 Drawing Color, Picture and Words same as standard sample According to standard sample Key
  2 Appearance The appearance of the printed product is clean no soiling and deformity refer to standard sample Visual Light
  3 Peel strength Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. Tape test Main
 
 
 
 
 
Tag:

kemasan effervescent

kemasan tabung effervescent